View SM501006_4127531.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SM5010 series Crystal Oscillator Module ICs
OVERVIEW
The SM5010 series are crystal oscillator module ICs. They incorporate oscillator and output buffer circuits, employing built-in oscillator capacitors and feedback resistors with excellent frequency response, eliminating the need for external components to form a stable crystal oscillator. There are 7 oscillator configurations available for design and application optimization.
FEATURES
I
7 types of oscillation circuit structure For fundamental oscillator * 5010Axx :Simple structure with low frequency variation * 5010Bxx :Low crystal current type with RD built-in oscillation circuit * 5010CLx :Oscillation stop function built-in * 5010DNx :External capacitors, CG and CD required * 5010EAx :Low current consumption type For 3rd overtone oscillator * 5010Fxx :Suitable for round blank * 5010Hxx :External resistor, Rf required
I I I I
I I I I I
2.7 to 5.5V operating supply voltage Capacitors CG, CD built-in Inverter amplifier feedback resistor built-in Output duty level * TTL level: AKx, BKx, HKx * CMOS level: ANx, AHx, BNx, BHx, CLx, DNx, EAx, FNx, FHx, HNx Oscillator frequency output (fO, fO/2, fO/4, fO/8, fO/16 determined by internal connection) Standby function Pull-up resistor built-in 8-pin SOP (SM5010xxxS) Chip form (CF5010xxx)
SERIES CONFIGURATION
For Fundamental Oscillator
Version1 CF5010AN1 CF5010AN2 CF5010AN3 CF5010AN4 CF5010AK1 CF5010AH1 CF5010AH2 CF5010AH3 CF5010AH4 CF5010BN1 CF5010BN2 CF5010BN3 CF5010BN4 CF5010BN5 CF5010BK1 CF5010BH1 CF5010BH2 CF5010BH3 CF5010BH4 CF5010CL1 CF5010CL2 CF5010CL3 CF5010CL4 CF5010CL5 CF5010DN1 CF5010EA1 CF5010EA2 Operating supply voltage range [V] Built-in capacitance CG CD [pF] [pF] RD [] Output current Output duty (VDD = 5V) level [mA] CMOS 2.7 to 5.5 29 29 - 16 CMOS/TTL TTL Output frequency fO fO/2 fO/4 fO/8 fO fO fO/2 fO/4 fO/8 fO fO/2 fO/4 fO/8 fO/16 fO fO fO/2 fO/4 fO/8 fO fO/2 fO/4 fO/8 fO/16 fO fO fO/2 INHN input level (VDD = 5V) Standby mode Oscillator stop function Output state
TTL
No
High impedance
4.5 to 5.5
29
29
-
16
TTL
No
High impedance
2.7 to 5.5
29
29
-
4
CMOS
TTL
No
High impedance
CMOS 2.7 to 5.5 22 22 820 16
CMOS/TTL
TTL
No
High impedance
4.5 to 5.5
22
22
820
16
TTL
TTL
No
High impedance
2.7 to 5.5
22
22
820
4
CMOS
TTL
No
High impedance
2.7 to 5.5
18
18
-
16
CMOS
CMOS
Yes
High impedance
2.7 to 5.5 2.7 to 5.5
- 10
- 15
820 820
16 4
CMOS CMOS
TTL TTL
No Yes
High impedance LOW
1. Package devices have designation SM5010xxxS. SEIKO NPC CORPORATION --1
SM5010 series
SERIES CONFIGURATION
For 3rd Overtone Oscillator
Version CF5010FNA CF5010FNC CF5010FND CF5010FNE CF5010FHA CF5010FHC CF5010FHD CF5010FHE CF5010HN1 CF5010HK1 4.5 to 5.5 4.5 to 5.5 1.17 1.17 4.5 to 5.5 1.00 4.5 to 5.5 2.7 to 5.5 1.00 Operating supply voltage range [V] Built-in capacitance gm ratio CG [pF] 13 11 13 8 13 11 13 8 13 13 CD [pF] 15 17 17 15 15 17 17 15 17 17 Rf [k] 4.2 3.1 2.2 2.2 4.2 3.1 2.2 2.2 200 200 16 16 CMOS TTL 4 CMOS 16 CMOS Output current (VDD = 5V) [mA] Output duty level
ORDERING INFORMATION
Device SM5010xxxS CF5010xxx-1 Package 8-pin SOP Chip form
PACKAGE DIMENSIONS
(Unit: mm) * 8-pin SOP
0.15 + 0.1 - 0.05
4.4 0.2
6.2 0.3
0.695typ 5.2 0.3
0.05 0.05
1.5
0.1
1.27
0.4 0.2
0.10 0.4 0.1 0.12 M
0 to 10
SEIKO NPC CORPORATION --2
SM5010 series
PAD LAYOUT
(Unit: m)
VDD Q (920,1180)
PINOUT
(Top view)
Y
HA5010
INHN XT XTN
1 2 3 4
8 7 6 5
VDD NC NC Q
(0,0) INHN XT XTN VSS X
Chip size: 0.92 x 1.18mm Chip thickness: 300 30m Chip base: VDD level
VSS
PIN DESCRIPTION and PAD DIMENSIONS
Pad dimensions [m] Number Name I/O Description X 1 2 3 4 5 6 7 8 INHN XT XTN VSS Q NC NC VDD I I O - O - - - Output state control input. Standby mode when LOW, pull-up resistor built in. In the case of the 5010CLx, the oscillator stops and Power-saving pull-up resistor is built-in to reduce current consumption at standby mode. Amplifier input. Amplifier output. Ground Output. Output frequency (fO, fO/2, fO/4, fO/8, fO/16) determined by internal connection No connection No connection Supply voltage Crystal oscillator connection pins. Crystal oscillator connected between XT and XTN 195 385 575 765 757.6 - - 165.4 Y 174.4 174.4 174.4 174.4 1017.6 - - 1014.6
SEIKO NPC CORPORATION --3
SM5010 series
BLOCK DIAGRAM
For Fundamental Oscillator
I
5010Axx, Bxx, CLx, DNx, EAx series
VDD VSS XTN
CG Rf CD RD 1/2 1/2 1/2 1/2
XT
Q
INHN
For 3rd Overtone Oscillator
I
5010Fxx, Hxx series
VDD VSS XTN
CG Rf CD
XT
Q
INHN
SEIKO NPC CORPORATION --4
SM5010 series
FUNCTIONAL DESCRIPTION
Standby Function
5010AHx, AKx, ANx, BHx, BKx, BNx, DNx, FNx, FHx, HNx, HKx series When INHN goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop. 5010CLx series When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes high impedance. 5010EAx series When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes LOW.
Version AHx, AKx, ANx, BHx, BKx, BNx, DNx, FHx, FHx, HNx, HKx series CLx series LOW HIGH (or open) EAx series LOW INHN HIGH (or open) LOW HIGH (or open) Q Any fO, fO/2, fO/4, fO/8 or fO/16 output frequency High impedance Any fO, fO/2, fO/4, fO/8 or fO/16 output frequency High impedance Either fO or fO/2 output frequency LOW Oscillator Normal operation Normal operation Normal operation Stopped Normal operation Stopped
Power-saving Pull-up Resistor (CL series only)
The INHN pull-up resistance changes in response to the input level (HIGH or LOW). When INHN goes LOW (standby state), the pull-up resistance becomes large to reduce the current consumption during standby.
SEIKO NPC CORPORATION --5
SM5010 series
SPECIFICATIONS
Absolute Maximum Ratings
VSS = 0V
Parameter Supply voltage range Input voltage range Output voltage range Operating temperature range Storage temperature range Symbol VDD VIN VOUT Topr Chip form Tstg 8-pin SOP AHx, BHx, FHx, EAx Output current IOUT PD ANx, AKx, BNx, BKx, CLx, DNx, FNx, HNx, HKx 8-pin SOP Condition Rating -0.5 to +7.0 -0.5 to VDD + 0.5 -0.5 to VDD + 0.5 -40 to +85 -65 to +150 -55 to +125 10 mA 25 500 mW Unit V V V C C
Power dissipation
Recommended Operating Conditions
3V operation VSS = 0V
Parameter Operating supply voltage Input voltage Symbol VDD VIN Version All version All version 5010ANx 5010AHx 5010BNx 5010BHx Operating temperature TOPR 5010CLx 5010DN1 5010EAx 5010FNx 5010ANx 5010AHx 5010BNx 5010BHx Operating frequency f 5010CLx 5010DN1 5010EAx 5010FNx 22 to 40 CL 15pF 2 to 30 2 to 16 2 to 30 2 to 16 MHz 2 to 30 -10 to +70 -20 to +80 -10 to +70 Condition Rating 2.7 to 3.6 VSS to VDD Unit V V
C
SEIKO NPC CORPORATION --6
SM5010 series 5V operation VSS = 0V
Parameter Operating supply voltage Input voltage Symbol VDD VIN Version All version All version 5010ANx 5010AKx 5010AHx 5010BNx 5010BKx 5010BHx 5010CLx 5010DN1 Operating temperature TOPR 5010EAx CL 15pF, f = 2 to 30MHz CL 15pF, f = 2 to 40MHz CL 50pF, 30MHz f 50MHz CL 15pF, 50MHz f 70MHz CL 15pF, 30MHz f 50MHz CL 15pF, 50MHz f 60MHz -10 to +70 -20 to +80 -15 to +75 -20 to +80 -15 to +75 -40 to +85 CL 50pF CL 15pF CL 50pF CL 15pF C -40 to +85 Condition Rating 4.5 to 5.5 VSS to VDD Unit V V
5010FNx
5010FHx 5010HN1 5010HK1 5010ANx 5010AKx 5010AHx 5010BNx 5010BKx 5010BHx 5010CLx Operating frequency f 5010DN1 5010EAx 5010FNx
2 to 30
CL 50pF CL 15pF, Ta = - 40 to + 85C CL 50pF, Ta = - 20 to + 80C CL 15pF, Ta = - 15 to + 75C CL 15pF, Ta = - 20 to + 80C CL 15pF, Ta = - 15 to + 75C CL 50pF CL 15pF 2 to 40 30 to 50 50 to 70 30 to 50 50 to 60 22 to 50
MHz
5010FHx 5010HN1 5010HK1
SEIKO NPC CORPORATION --7
SM5010 series
Electrical Characteristics
5010ANx, BNx, DNx series 3V operation: VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition Q: Measurement cct 1, VDD = 2.7V, IOH = 8mA Q: Measurement cct 2, VDD = 2.7V, IOL = 8mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 3.6V VOH = VDD VOL = VSS 5010xN1 5010xN2 Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 30MHz 5010xN3 5010xN4 5010xN5 INHN pull-up resistance Feedback resistance Oscillator amplifier output resistance RUP2 Rf RD CG Built-in capacitance CD Measurement cct 4 Measurement cct 5 Design value 5010Bxx 5010Axx Design value. A monitor pattern on a wafer is tested. 5010Bxx 5010Axx 5010Bxx Rating min 2.1 - 2.0 - - - - - - - - 40 80 690 26 20 26 20 typ 2.4 0.3 - - - - 5 3.5 2.5 2 2 100 200 820 29 22 29 22 max - 0.4 - 0.5 10 10 10 7 5 4 4 250 500 940 32 24 32 24 pF k k mA Unit V V V V A
5010ANx, AKx, BNx, BKx, DNx series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition Q: Measurement cct 1, VDD = 4.5V, IOH = 16mA Q: Measurement cct 2, VDD = 4.5V, IOL = 16mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 5.5V VOH = VDD VOL = VSS 5010xN1 5010xN2 Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 50pF, f = 30MHz 5010xN3 5010xN4 5010xN5 Measurement cct 3, load cct 2, INHN = open, CL = 15pF, f = 30MHz INHN pull-up resistance Feedback resistance Oscillator amplifier output resistance RUP2 Rf RD CG Built-in capacitance CD Measurement cct 4 Measurement cct 5 Design value 5010Bxx 5010Axx Design value. A monitor pattern on a wafer is tested. 5010Bxx 5010Axx 5010Bxx 5010xK1 Rating min 3.9 - 2.0 - - - - - - - - - 40 80 690 26 20 26 20 typ 4.2 0.3 - - - - 15 9 6 5 5 10 100 200 820 29 22 29 22 max - 0.4 - 0.8 10 10 30 18 12 10 10 20 250 500 940 32 24 32 24 pF k k mA Unit V V V V A
SEIKO NPC CORPORATION --8
SM5010 series 5010AHx, BHx series 3V operation: VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, VDD = 2.7V, IOH = 2mA Q: Measurement cct 2, VDD = 2.7V, IOL = 2mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 3.6V VOH = VDD VOL = VSS 5010xH1 Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 16MHz 5010xH2 5010xH3 5010xH4 INHN pull-up resistance Feedback resistance Oscillator amplifier output resistance RUP2 Rf RD CG Built-in capacitance CD Design value. A monitor pattern on a wafer is tested. Measurement cct 4 Measurement cct 5 Design value 5010Bxx 5010Axx 5010Bxx 5010Axx 5010Bxx 2.1 - 2.0 - - - - - - - 40 80 690 26 20 26 20 typ 2.4 0.3 - - - - 3 2 1.5 1.5 100 200 820 29 22 29 22 max - 0.5 - 0.5 10 A 10 6 4 mA 3 2.5 250 500 940 32 24 pF 32 24 k k V V V V Unit
5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, VDD = 4.5V, IOH = 4mA Q: Measurement cct 2, VDD = 4.5V, IOL = 4mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 5.5V VOH = VDD VOL = VSS 5010xH1 Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 30MHz 5010xH2 5010xH3 5010xH4 INHN pull-up resistance Feedback resistance Oscillator amplifier output resistance RUP2 Rf RD CG Built-in capacitance CD Design value. A monitor pattern on a wafer is tested. Measurement cct 4 Measurement cct 5 Design value 5010Bxx 5010Axx 5010Bxx 5010Axx 5010Bxx 3.9 - 2.0 - - - - - - - 40 80 690 26 20 26 20 typ 4.2 0.3 - - - - 9 6 5 4 100 200 820 29 22 29 22 max - 0.5 - 0.8 10 A 10 18 12 mA 10 8 250 500 940 32 24 pF 32 24 k k V V V V Unit
SEIKO NPC CORPORATION --9
SM5010 series 5010CLx series 3V operation: VDD = 2.7 to 3.6V, VSS = 0V, Ta = -20 to +80C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, VDD = 2.7V, IOH = 8mA Q: Measurement cct 2, VDD = 2.7V, IOL = 8mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 3.6V VOH = VDD VOL = VSS 5010CL1 5010CL2 Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 30MHz 5010CL3 5010CL4 5010CL5 Standby current INHN pull-up resistance Feedback resistance Built-in capacitance IST RUP1 RUP2 Rf CG CD Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 16 18 20 Measurement cct 6, INHN = LOW Measurement cct 4 40 80 16 100 200 18 250 500 20 pF k k 2.2 - 0.7VDD - - - - - - - - - 2 typ 2.4 0.3 - - - - 5 3.5 2.5 2 2 - 4 max - 0.4 - 0.3VDD 10 A 10 10 7 5 4 4 5 15 A M mA V V V V Unit
5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, VDD = 4.5V, IOH = 16mA Q: Measurement cct 2, VDD = 4.5V, IOL = 16mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 5.5V VOH = VDD VOL = VSS 5010CL1 5010CL2 Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 50pF, f = 30MHz 5010CL3 5010CL4 5010CL5 Standby current INHN pull-up resistance Feedback resistance Built-in capacitance IST RUP1 RUP2 Rf CG CD Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 16 18 20 Measurement cct 6, INHN = LOW Measurement cct 4 40 80 16 100 200 18 250 500 20 pF k k 4.0 - 0.7VDD - - - - - - - - - 1 typ 4.2 0.3 - - - - 15 9 6 5 5 - 2 max - 0.4 - 0.3VDD 10 A 10 30 18 12 10 10 10 8 A M mA V V V V Unit
SEIKO NPC CORPORATION --10
SM5010 series 5010EAx series 3V operation: VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Current consumption INHN pull-up resistance Feedback resistance Oscillator amplifier output resistance Built-in capacitance Symbol VOH VOL VIH VIL IDD RUP2 Rf RD CG CD Condition min Q: Measurement cct 1, VDD = 2.7V, IOH = 2mA Q: Measurement cct 2, VDD = 2.7V, IOL = 2mA INHN INHN Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 30MHz Measurement cct 4 Measurement cct 5 Design value 5010EA1 5010EA2 2.1 - 2.0 - - - 40 80 690 9 Design value. A monitor pattern on a wafer is tested. 13 15 17 typ 2.4 0.3 - - 4 2.5 100 200 820 10 max - 0.5 - 0.5 8 mA 5 250 500 940 11 pF k k V V V V Unit
5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Symbol VOH VOL VIH VIL IDD1 Current consumption IDD2 INHN pull-up resistance Feedback resistance Oscillator amplifier output resistance Built-in capacitance RUP2 Rf RD CG CD Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 40MHz Measurement cct 4 Measurement cct 5 Design value 5010EA1 5010EA2 - - 40 80 690 9 Design value. A monitor pattern on a wafer is tested. 13 15 17 9 6 100 200 820 10 18 12 250 500 940 11 pF k k Condition min Q: Measurement cct 1, VDD = 4.5V, IOH = 3.2mA Q: Measurement cct 2, VDD = 4.5V, IOL = 3.2mA INHN INHN Measurement cct 3, load cct 1, INHN = open, CL = 15pF, f = 30MHz 5010EA1 5010EA2 3.9 - 2.0 - - - typ 4.2 0.3 - - 6 5 max - 0.4 - 0.8 12 10 mA V V V V Unit
SEIKO NPC CORPORATION --11
SM5010 series 5010FNx series 3V operation: VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, VDD = 2.7V, IOH = 8mA Q: Measurement cct 2, VDD = 2.7V, IOL = 8mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 3.6V VOH = VDD VOL = VSS 5010FNA, FNC f = 30MHz 5010FND f = 40MHz 2.2 - 2.0 - - - - - 40 5010FNA Feedback resistance Rf Measurement cct 5 5010FNC 5010FND 5010FNA CG Built-in capacitance CD Design value. A monitor pattern on a wafer is tested. 5010FNC 5010FND 5010FNA 5010FNC 5010FND 3.57 2.63 1.87 11.7 9.9 11.7 13.5 15.3 15.3 typ 2.4 0.3 - - - - 8 10 100 4.2 3.1 2.2 13 11 13 15 17 17 max - 0.4 - 0.5 10 A 10 16 mA 20 250 4.83 3.57 2.53 14.3 12.1 14.3 pF 16.5 18.7 18.7 k k V V V V Unit
Current consumption
IDD
Measurement cct 3, load cct 1, INHN = open, CL = 15pF Measurement cct 4
INHN pull-up resistance
RUP
SEIKO NPC CORPORATION --12
SM5010 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V 30 f 50MHz: Ta = -20 to +80C, 50 < f 70MHz: Ta = -15 to +75C unless otherwise noted.
Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ IDD1 Current consumption IDD2 Measurement cct 3, load cct 1, INHN = open, CL = 50pF Measurement cct 4 5010FNA 5010FNC Feedback resistance Rf Measurement cct 5 5010FND 5010FNE 5010FNA 5010FNC CG Design value. A monitor pattern on a wafer is tested. CD 5010FND 5010FNE 5010FNA 5010FNC 5010FND 5010FNE 1.87 1.87 11.7 9.9 11.7 7.2 13.5 15.3 15.3 13.5 2.2 2.2 13 11 13 8 15 17 17 15 2.53 2.53 14.3 12.1 14.3 8.8 pF 16.5 18.7 18.7 16.5 Condition min Q: Measurement cct 1, VDD = 4.5V, IOH = 16mA Q: Measurement cct 2, VDD = 4.5V, IOL = 16mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 5.5V Measurement cct 3, load cct 1, INHN = open, CL = 15pF VOH = VDD VOL = VSS 5010FNE f = 70MHz 5010FNA, FNC f = 40MHz 5010FND f = 50MHz 3.9 - 2.0 - - - - - - 40 3.57 2.63 typ 4.2 0.3 - - - - 25 23 25 100 4.2 3.1 max - 0.4 - 0.8 10 A 10 50 45 50 250 4.83 3.57 k k mA V V V V Unit
INHN pull-up resistance
RUP
Built-in capacitance
SEIKO NPC CORPORATION --13
SM5010 series 5010FHx series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V 30 f 50MHz: Ta = -20 to +80C, 50 < f 60MHz: Ta = -15 to +75C unless otherwise noted.
Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition Q: Measurement cct 1, VDD = 4.5V, IOH = 4mA Q: Measurement cct 2, VDD = 4.5V, IOL = 4mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 5.5V VOH = VDD VOL = VSS 5010FHA, FHC f = 40MHz Current consumption IDD Measurement cct 3, load cct 1, INHN = open, CL = 15pF 5010FHD f = 50MHz 5010FHE f = 60MHz INHN pull-up resistance RUP Measurement cct 4 5010FHA Feedback resistance Rf Measurement cct 5 5010FHC 5010FHD 5010FHE 5010FHA CG Built-in capacitance Design value. A monitor pattern on a wafer is tested. CD 5010FHC 5010FHD 5010FHE 5010FHA 5010FHC 5010FHD 5010FHE Rating min 3.9 - 2.0 - - - - - - 40 3.57 2.63 1.87 1.87 11.7 9.9 11.7 7.2 13.5 15.3 15.3 13.5 typ 4.2 0.3 - - - - 13 15 17 100 4.2 3.1 2.2 2.2 13 11 13 8 15 17 17 15 max - 0.5 - 0.8 10 10 26 30 34 250 4.83 3.57 2.53 2.53 14.3 12.1 14.3 8.8 16.5 18.7 18.7 16.5 pF k k mA Unit V V V V A
5010HNx, HKx series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ IDD1 Current consumption IDD2 INHN pull-up resistance Feedback resistance Built-in capacitance RUP Rf CG CD Condition Q: Measurement cct 1, VDD = 4.5V, IOH = 16mA Q: Measurement cct 2, VDD = 4.5V, IOL = 16mA INHN INHN Q: Measurement cct 2, INHN = LOW, VDD = 5.5V Measurement cct 3, load cct 2, INHN = open, CL = 15pF, f = 50MHz Measurement cct 3, load cct 1, INHN = open, CL = 50pF, f = 50MHz Measurement cct 4 Measurement cct 5 Design value. A monitor pattern on a wafer is tested. VOH = VDD VOL = VSS 5010HK1 5010HN1 Rating min 3.9 - 2.0 - - - - - 40 80 11.7 15.3 typ 4.2 0.3 - - - - 20 25 100 200 13 17 max - 0.4 - 0.8 10 10 40 mA 50 250 500 14.3 18.7 k k pF Unit V V V V A
SEIKO NPC CORPORATION --14
SM5010 series
Switching Characteristics
5010ANx, BNx, DNx series
3V operation/Duty level: CMOS
VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Symbol tr1 tf1 Duty tPLZ tPZL Condition min Measurement cct 6, load cct 1, CL = 15pF, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, CL = 15pF, 0.9VDD to 0.1VDD Measurement cct 6, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF, f = 30MHz Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF - - 40 - - typ 3.0 3.0 - - - max 6.0 6.0 60 100 100 ns ns % ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
5010ANx, AKx, BNx, BKx, DNx series
5V operation/Duty level: CMOS (5010ANx, BNx, DN1)
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time Output duty cycle1 Output disable delay time Output enable delay time tf1 tf2 Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD CL = 15pF CL = 50pF CL = 15pF CL = 50pF - - - - 45 - - typ 2.0 4.0 2.0 4.0 - - - max 4.0 ns 8.0 4.0 ns 8.0 55 100 100 % ns ns Unit
Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C, CL = 50pF, f = 30MHz Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot.
5V operation/Duty level: TTL (5010xK1, AN2, AN3, AN4, BN2, BN3, BN4, BN5)
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Symbol tr3 tf3 Duty tPLZ tPZL Condition min Measurement cct 6, load cct 2, CL = 15pF, 0.4V to 2.4V Measurement cct 6, load cct 2, CL = 15pF, 2.4V to 0.4V Measurement cct 6, load cct 2, VDD = 5.0V, Ta = 25C, CL = 15pF, f = 30MHz Measurement cct 7, load cct 2, VDD = 5.0V, Ta = 25C, CL = 15pF - - 45 - - typ 1.5 1.5 - - - max 3.0 3.0 55 100 100 ns ns % ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
SEIKO NPC CORPORATION --15
SM5010 series 5010AHx, BHx series
3V operation/Duty level: CMOS
VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Symbol tr1 tf1 Duty tPLZ tPZL Condition min Measurement cct 6, load cct 1, CL = 15pF, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, CL = 15pF, 0.9VDD to 0.1VDD Measurement cct 6, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF, f = 16MHz Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF - - 40 - - typ 8 8 - - - max 16 16 60 100 100 ns ns % ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
5V operation/Duty level: CMOS
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time Output duty cycle1 Output disable delay time Output enable delay time tf1 tf2 Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD CL = 15pF CL = 50pF CL = 15pF CL = 50pF - - - - 45 - - typ 5 13 5 13 - - - max 10 ns 26 10 ns 26 55 100 100 % ns ns Unit
Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF, f = 30MHz Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot.
SEIKO NPC CORPORATION --16
SM5010 series 5010CLx series
3V operation/Duty level: CMOS
VDD = 2.7 to 3.6V, VSS = 0V, Ta = -20 to +80C unless otherwise noted.
Rating Parameter Symbol tr1 tr4 Output fall time Output duty cycle1 Output disable delay time2 Output enable delay time2 tf1 tf4 Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD CL = 15pF CL = 30pF CL = 15pF CL = 30pF - - - - 45 - - typ 2.0 3.0 2.0 3.0 - - - max 4.0 ns 6.0 4.0 ns 6.0 55 100 100 % ns ns Unit
Measurement cct 6, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF, f = 30MHz Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
5V operation/Duty level: CMOS
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time Output duty cycle1 Output disable delay time2 Output enable delay time2 tf1 tf2 Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD CL = 15pF CL = 50pF CL = 15pF CL = 50pF - - - - 40 - - typ 1.5 4.0 1.5 4.0 - - - max 3.0 ns 8.0 3.0 ns 8.0 60 100 100 % ns ns Unit
Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C, CL = 50pF, f = 30MHz Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
SEIKO NPC CORPORATION --17
SM5010 series 5010EAx series
3V operation/Duty level: CMOS
VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time2 Output enable delay time2 Symbol tr1 tf1 Duty tPLZ tPZL Condition min Measurement cct 6, load cct 1, CL = 15pF, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, CL = 15pF, 0.9VDD to 0.1VDD Measurement cct 6, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF, f = 30MHz Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF - - 40 - - typ 8 8 - - - max 16 16 60 100 100 ns ns % ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
5V operation/Duty level: CMOS
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time tf1 tf2 Output duty cycle1 Output disable delay time2 Output enable delay time2 Duty1 Duty2 tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF CL = 15pF CL = 50pF CL = 15pF CL = 50pF f = 30MHz f = 40MHz - - - - 45 40 - - typ 5 13 5 13 - - - - max 10 ns 26 10 ns 26 55 % 60 100 100 ns ns Unit
Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed.
SEIKO NPC CORPORATION --18
SM5010 series 5010FNx series
3V operation/Duty level: CMOS
VDD = 2.7 to 3.6V, VSS = 0V, Ta = -10 to +70C unless otherwise noted.
Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Symbol tr1 tf1 Duty tPLZ tPZL Condition min Measurement cct 6, load cct 1, CL = 15pF, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, CL = 15pF, 0.9VDD to 0.1VDD Measurement cct 6, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF, f = 40MHz Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25C, CL = 15pF - - 40 - - typ 3.0 3.0 - - - max 6.0 6.0 60 100 100 ns ns % ns ns Unit
1. The duty cycle characteristic is checked the sample chips of each production lot.
5V operation/Duty level: CMOS
VDD = 4.5 to 5.5V, VSS = 0V 30 f 50MHz: Ta = -20 to +80C, 50 < f 70MHz: Ta = -15 to +75C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time tf1 tf2 Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD CL = 15pF CL = 50pF CL = 15pF CL = 50pF CL = 50pF f = 50MHz CL = 15pF f = 70MHz - - - - 45 40 - - typ 1.5 3.0 1.5 3.0 - - - - max 3.0 ns 6.0 3.0 ns 6.0 55 % 60 100 100 ns ns Unit
Output duty cycle1
Duty
Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C
Output disable delay time Output enable delay time
tPLZ tPZL
Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot.
SEIKO NPC CORPORATION --19
SM5010 series 5010FHx series
5V operation/Duty level: CMOS
VDD = 4.5 to 5.5V, VSS = 0V 30 f 50MHz: Ta = -20 to +80C, 50 < f 60MHz: Ta = -15 to +75C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time tf1 tf2 Output duty cycle1 Output disable delay time Output enable delay time Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF CL = 15pF CL = 50pF CL = 15pF CL = 50pF f = 50MHz f = 60MHz - - - - 45 40 - - typ 4 11 4 11 - - - - max 8 ns 21 8 ns 21 55 % 60 100 100 ns ns Unit
Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot.
5010HNx series
5V operation/Duty level: CMOS
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Symbol tr1 tr2 Output fall time Output duty cycle1 Output disable delay time Output enable delay time tf1 tf2 Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 1, 0.1VDD to 0.9VDD Measurement cct 6, load cct 1, 0.9VDD to 0.1VDD CL = 15pF CL = 50pF CL = 15pF CL = 50pF - - - - 45 - - typ 1.5 3.0 1.5 3.0 - - - max 3.0 ns 6.0 3.0 ns 6.0 55 100 100 % ns ns Unit
Measurement cct 6, load cct 1, VDD = 5.0V, Ta = 25C, CL = 50pF, f = 50MHz Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot.
SEIKO NPC CORPORATION --20
SM5010 series 5010HKx series
5V operation/Duty level: TTL
VDD = 4.5 to 5.5V, VSS = 0V, Ta = -40 to +85C unless otherwise noted.
Rating Parameter Symbol tr3 tr5 Output fall time Output duty cycle1 Output disable delay time Output enable delay time tf3 tf5 Duty tPLZ tPZL Condition min Output rise time Measurement cct 6, load cct 2, 0.4V to 2.4V Measurement cct 6, load cct 2, 2.4V to 0.4V CL = 15pF CL = 50pF CL = 15pF CL = 50pF - - - - 45 - - typ 1.2 2.0 1.2 2.0 - - - max 2.4 ns 5.0 2.4 ns 5.0 55 100 100 % ns ns Unit
Measurement cct 6, load cct 2, VDD = 5.0V, Ta = 25C, CL = 15pF, f = 50MHz Measurement cct 7, load cct 2, VDD = 5.0V, Ta = 25C, CL = 15pF
1. The duty cycle characteristic is checked the sample chips of each production lot.
Current consumption and Output waveform with NPC's standard crystal
for Fundamental oscillator
f [MHz] 30 R [] 17.2 16.8 L [mH] 4.36 2.90 Ca [fF] 6.46 5.47 Cb [pF] 2.26 2.08
Cb
40
for 3rd overtone oscillator
f [MHz] R [] 18.62 20.53 22.17 15.37 25.42 L [mH] 16.24 11.34 7.40 3.83 4.18 Ca [fF] 1.733 1.396 1.370 1.836 1.254 Cb [pF] 5.337 3.989 4.105 5.191 5.170
L
Ca
R
30 40 50 60 70
SEIKO NPC CORPORATION --21
SM5010 series
MEASUREMENT CIRCUITS
Measurement cct 1 Measurement cct 4
VDD
VDD
Q R2
Signal Generator
R1
C1 XT VSS
RUP1 = VSS INHN
VDD IPR
(VIL = 0V)
V
Q output VOH 0V
RUP2 = VDD VIH (VIH = 0.7VDD) IPR
VIH VIL
A
IPR
2.0VP-P , 10MHz sine wave input signal (3V operation) 3.5VP-P , 10MHz sine wave input signal (5V operation) C1 : 0.001F R1 : 50 R2 : 5010ANx, BNx, DNx, AKx, BKx 3V operation: 263 5V operation: 245 5010FNx, HNx, HKx 3V operation: 275 5V operation: 245 5010CLx 3V operation: 275 5V operation: 250 5010EAx, AHx, BHx 3V operation: 1050 5010EAx, AHx, BHx, FHx 5V operation: 975
Measurement cct 5
VDD XT Rf = XTN VSS VDD IRf
A
IRf
Measurement cct 2 Measurement cct 6
IZ, IOL VDD Q INHN VSS IZ
A A
CG XT Rfo CD X'tal XTN INHN VDD
IST
V VOL
Q VSS
Measurement cct 3
Crystal oscillation CG, CD: 22pF (5010DNx) Rfo: 3.0k (5010Hxx)
A
VDD IDD
Measurement cct 7
Signal Generator
R1
C1 XT VSS Q VDD
Signal Generator
R1
XT
Q VSS INHN
2.0VP-P , 30MHz sine wave input signal (3V operation) 3.5VP-P , 30MHz sine wave input signal (5V operation) C1 : 0.001F R1 : 50 R1 : 50 SEIKO NPC CORPORATION --22
SM5010 series
Load cct 1
Load cct 2
Q output CL
(Including probe capacitance)
R Q output
(Including probe capacitance)
CL
CL = 15pF : DUTY , IDD , tr1 , tf1 CL = 30pF : tr4 , tf4 CL = 50pF : tr2 , tf2
CL = 15pF : DUTY, IDD , tr3 , tf3 CL = 50pF : tr5 , tf5 R = 400
Switching Time Measurement Waveform
Output duty level (CMOS)
Q output
0.9VDD 0.1VDD TW
0.9VDD 0.1VDD
DUTY measurement voltage (0.5V DD)
tr
Output duty level (TTL)
tf
Q output
2.4V 0.4V TW
2.4V 0.4V
DUTY measurement voltage (1.4V )
tr
Output duty cycle (CMOS)
tf
Q output
TW T
DUTY measurement voltage (0.5VDD) DUTY= TW/ T 100 (%)
Output duty cycle (TTL)
Q output
TW T
DUTY measurement voltage (1.4V) DUTY= TW/ T 100 (%)
SEIKO NPC CORPORATION --23
SM5010 series
Output Enable/Disable Delay
INHN
VIL
VIH
tPLZ Q output
INHN input waveform
tPZL
tr = tf
10ns
Note (CLx/EAx series only): when the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
SEIKO NPC CORPORATION --24
SM5010 series
Please pay your attention to the following points at time of using the products shown in this document. The products shown in this document (hereinafter "Products") are not intended to be used for the apparatus that exerts harmful influence on human lives due to the defects, failure or malfunction of the Products. Customers are requested to obtain prior written agreement for such use from SEIKO NPC CORPORATION (hereinafter "NPC"). Customers shall be solely responsible for, and indemnify and hold NPC free and harmless from, any and all claims, damages, losses, expenses or lawsuits, due to such use without such agreement. NPC reserves the right to change the specifications of the Products in order to improve the characteristic or reliability thereof. NPC makes no claim or warranty that the contents described in this document dose not infringe any intellectual property right or other similar right owned by third parties. Therefore, NPC shall not be responsible for such problems, even if the use is in accordance with the descriptions provided in this document. Any descriptions including applications, circuits, and the parameters of the Products in this document are for reference to use the Products, and shall not be guaranteed free from defect, inapplicability to the design for the mass-production products without further testing or modification. Customers are requested not to export or re-export, directly or indirectly, the Products to any country or any entity not in compliance with or in violation of the national export administration laws, treaties, orders and regulations. Customers are requested appropriately take steps to obtain required permissions or approvals from appropriate government agencies.
SEIKO NPC CORPORATION
15-6, Nihombashi-kabutocho, Chuo-ku, Tokyo 103-0026, Japan Telephone: +81-3-6667-6601 Facsimile: +81-3-6667-6611 http://www.npc.co.jp/ Email: sales@npc.co.jp
NC0015DE 2006.04
SEIKO NPC CORPORATION --25

▲Up To Search▲

Price & Availability of SM501006

	To Download SM501006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .